-
Audio
-
Amplifiers
Pre-amplifiers
Transistors
Balanced I/O
Power Management
Dynamics Processors
Special Function
-
-
Industrial
-
Power Management
Discrete Semiconductors
Op-amps and Comparators
IIoT Memory
Sensor Technology
Alarms and Monitoring
-
-
Partners
- Why Profusion?
- News
- Contact
-
Store
- Alternate parts in the family(Compare): THAT72XX
- Moisture sensitivity level: 3
- RoHS 3(EU 2015/863)
-
Pack sizes & weights (for bulk orders) TUBE 100 0.010kg
Newly Released
THAT7200M10-U Clock Generator and Cleaner
Sku:
THAT7200M10-U
Features
- Extremely low jitter clocking for high performance digital audio systems
- Baseband jitter: < 25ps RMS
- Jitter attenuation: > 60dB (>100Hz)
- Compatible Mode with CS2000 and CS2500
- Pin and register compatible
- Enhanced JetPLL performance
- Generates MCLK and frame Sync
- Phase-aligned to the reference
- Repeatable latency
- AES11-compliant
- Fast lock time: less than 1 second
- I2C/SPI Control interface
- PLL lock and other signals assignable to pins
The THAT 7200 generates a low-jitter MCLK from a jittery input WCLK or an internal frequency generator. Incorporating patented JetPLL technology it uses a combination of numeric and analog feedback loops to attenuate the source clock's jitter in the band of interest, thus generating an extremely clean output clock optimized for audio applications.
The JetPLL enables high-performance ADCs and DACs to reach their full performance potential. The input WCLK frequency can go as low as 6 Hz. The cleaned output clock frequency is programmable over the range of 6MHz to 50MHz through the I2C/SPI control port. The part is designed to be program-compatible with the registers for the Cirrus CS2000 insofar as pro audio applications are concerned, but provides additional configuration features and performance.
The THAT 7200 delivers base band jitter below 25 ps and wide band jitter below 100 ps. This supports audio signal converters with over 118 dB dynamic range.
The THAT 7200 also provides an auxiliary output that can serve as a phase-aligned frame clock running at a base rate dependent on the WCLK input. This ensures that digital output interfaces can be sample aligned with the source, thus complying with AES11 requirements. Alternatively, the FSOUT may be used to provide a buffered version of the reference clock or the output clock or serve as the PLL's lock indicator.
The THAT 7200 operates in two modes; Compatibility mode which exposes a register set like the CS 2000, and Native JetPLL Mode which presents a more versatile set of features and corresponding register set and a frame sync output.
Introduction to THAT7200 Series
Baseband Jitter | 25 ps |
---|---|
Jitter Attenuation | 60 dB |
Clock Frequency Range | 6-50 MHz |
Supply Voltage (min) | 3V |
Supply Voltage (max) | 3.6V |
Supply Current | - |
Applications
European Union Customers
Orders to European countries are delivered by a tracked courier at a rate of €19.50 (5-7 working days).
Deliveries to the EU will be dispatched from the UK via our distribution hub in the Netherlands. You will receive tracking information direct from our courier company when the goods leave the distribution hub.
Using this method means there is no need for you to clear your goods through customs, and VAT will be charged on your invoice in accordance with EU VAT regulations – If you are VAT registered, VAT is 0% using the Reverse Charge rules. If you are not a VAT registered business, VAT is charged at your country’s standard rate.
All prices shown exclude VAT.