MAS6116EA1SA306 Stereo Digital Volume Control
Sku:
MAS6116EA1SA306
- Gain range from-111.5dB to +15.5dB
- Gain step size 0.5dB
- THD 0.0002% in balanced mode
- SNR 124dB in balanced mode
- Crosstalk -110dB typical
- Input Signals up to +/-18V
- Zero Detection for Gain Changes
- Hardware and Software Mute
- Power On/Off Transient Suppression
The MAS6116 is an ultra low noise stereo volume control for audio systems. When used in a balanced mono mode the linearity is an impressive 0.0002% (THD+N).
The design is based on resistor chains with external op-amps, which provide flexibility for the supply voltage, signal swing, noise floor and cost optimisation. The gain of each channel can be independently programmed from -111.5dB to +15.5dB through a digital serial control interface.
Audible clicks on gain changes are eliminated by changing gains only when a zero crossing has been detected in the signal.The device also features peak level detection, which can be used for AGC.
The MAS6116 is available in a 16 pin SOIC package.
Evaluation Board MAS6116EB is available for this product.
| Number of Channels | 2 |
|---|---|
| Supply Voltage (min) | 4.5V |
| Supply Voltage (max) | 5.5V |
| Volume Range | -111.5 to +15.5 / 0.5dB steps |
| Input Selector | ±18V pro-level input signal |
| Interface | 3-Wired Serial |
European Union Customers
Orders to European countries are delivered by a tracked courier at a rate of €19.50 (5-7 working days).
Deliveries to the EU will be dispatched from the UK via our distribution hub in the Netherlands. You will receive tracking information direct from our courier company when the goods leave the distribution hub.
Using this method means there is no need for you to clear your goods through customs, and VAT will be charged on your invoice in accordance with EU VAT regulations – If you are VAT registered, VAT is 0% using the Reverse Charge rules. If you are not a VAT registered business, VAT is charged at your country’s standard rate.
All prices shown exclude VAT.
