- Alternate parts in the family(Compare): THAT72XX
- Moisture sensitivity level: 3
- RoHS 3(EU 2015/863)
-
Pack sizes & weights (for bulk orders) TUBE 100 0.010kg
THAT7210M10-U Clock Cleaner
Sku:
THAT7210M10-U
- Extremely low jitter clocking for high performance digital audio systems
- Baseband jitter: < 25ps RMS
- Jitter attenuation: > 60dB (>100Hz)
- Compatible Mode with CS2100 and CS2501
- Pin and register compatible
- Enhanced JetPLL performance
- Native JetPLL Mode
- Register access to all JetPLL parameters
- Generates MCLK and Frame Sync
- Phase-aligned to the reference
- Repeatable latency
- AES11-compliant
- Continuous Base Rate frequency range 30k to 50kHz
- Fast lock time: less than 1 second
- I2C/SPI Control interface
- PLL lock and other signals assignable to pins
The THAT 7210 is an audio clock cleaner with patented Jitter Elimination Technology - JetPLL. The JetPLL generates a low-jitter master clock (MCLK) from a jittery input word clock (WCLK) and enables high-performance ADCs and DACs to reach their full performance potential. It is intended for clock cleaning only and has no frequency generator.
The part is designed to be program-compatible with the registers for the Cirrus CS 2100 insofar as pro audio applications are concerned. The THAT 7210 delivers base band jitter below 25 ps and wide band jitter below 100 ps. In Compatibility Mode the register set is that of a CS 2100 and in Native Mode registers are a subset of the 7200, since there is no frequency generator here.
Introduction to THAT7200 Series
| Baseband Jitter | 25 ps |
|---|---|
| Jitter Attenuation | 60 dB |
| Clock Frequency Range | 6-50 MHz |
| Supply Voltage (min) | 3V |
| Supply Voltage (max) | 3.6V |
| Supply Current | - |
Applications
European Union Customers
Orders to European countries are delivered by a tracked courier at a rate of €19.50 (5-7 working days).
Deliveries to the EU will be dispatched from the UK via our distribution hub in the Netherlands. You will receive tracking information direct from our courier company when the goods leave the distribution hub.
Using this method means there is no need for you to clear your goods through customs, and VAT will be charged on your invoice in accordance with EU VAT regulations – If you are VAT registered, VAT is 0% using the Reverse Charge rules. If you are not a VAT registered business, VAT is charged at your country’s standard rate.
All prices shown exclude VAT.
