• Alternate parts in the family(Compare): NJM13600
  • Moisture sensitivity level: 1
  • RoHS 3(EU 2015/863)
Obsolete but Stock Available

NJM13600M Dual Transconductance Amp

Product Code:

NJM13600M

- +
Funktionen
  • Excellent Linearity
  • High Output s/n ratio
  • Excellent matching between amplifiers
  • Special Function for AudioExcellent Linearity

    The transconductance amplifier differs from the standard op-amp in two ways:

    The output is a constant current source whose output is proportional to the input voltage.

    The gain,or more correctly,the transconductance,is set externally by the adjustment of the current through the bias terminal.This controls the magnitude of the constant current source.

    These unique features offer accurate gain without the use of negative feedback.This eliminates closed loop phase shift that can cause oscillations in conventional amplifiers.

    The surface mount NJM13600 consists of two voltage controlled current (transconductance) amplifiers each with differential inputs and a push pull output.

    The two amplifiers share common supplies but otherwise operate independently.

    Linearising diodes are provided at the inputs to reduce distortion and allow higher input levels.The result is a 10dB signal to noise improvement referenced to 0.5% THD.

    Controlled impedance buffers are provided which are designed to complement the dynamic range of the amplifiers.

    Technical Specification
    Number of Circuits 2
    Supply Voltage (min) 1V
    Supply Voltage (max) ±18V
    Input Offset Voltage 0.3mV
    Input Offset Current 100nA
    Input Bias Current 400nA
    Supply Current 2.6mA
    Gain Bandwidth -
    Slew Rate 50V/μs
    Noise -

    European Union Customers

    Orders to European countries are delivered by a tracked courier at a rate of €19.50 (5-7 working days).

    Deliveries to the EU will be dispatched from the UK via our distribution hub in the Netherlands. You will receive tracking information direct from our courier company when the goods leave the distribution hub.

    Using this method means there is no need for you to clear your goods through customs, and VAT will be charged on your invoice in accordance with EU VAT regulations – If you are VAT registered, VAT is 0% using the Reverse Charge rules. If you are not a VAT registered business, VAT is charged at your country’s standard rate.

     

    All prices shown exclude VAT.

     

    View all delivery rates