-
Audio
-
Amplifiers
Pre-amplifiers
Transistors
Balanced I/O
Power Management
Dynamics Processors
Special Function
-
-
Industrial
-
Power Management
Discrete Semiconductors
Op-amps and Comparators
IIoT Memory
Sensor Technology
Alarms and Monitoring
-
-
Partners
- Why Profusion?
- News
- Contact
-
Store
Active
P1786G-S08-R PWM Step Down Converter
Sku:
P1786G-S08-R
Features
- Input voltage: 4.0V ~ 23V
- Output voltage: 0.8V ~ VCC
- Duty ratio: 0% to 100% PWM control
- Oscillation frequency: 300KHz typ.
- Soft-start, current limit, enable function
- Thermal shutdown function
- Built-in internal SW P-channel MOS
UTC's P1786 consists of 3A step-down switching regulator controlwhich includes a reference voltage source, oscillation circuit, erroramplifier and internal PMOS.
The P1786 can provide low-ripple power, high efficiency, andexcellent transient characteristics.
An enable function, an over current protect and short circuit protect function are built inside, so the operation frequency can be reduced from 300KHz to 30KHz when OCP or SCP occurs.
The PWM control circuit can vary the duty ratio linearly from 100 down to 0%.
This converter also includes an error amplifier circuit as well as a soft-start circuit that prevents overshoot at startup.
An internal compensation block is built in to reduce external component count.
These ICs can work as step-down switching regulators with theaddition of an internal P-channel Power MOS, a coil, capacitors, and a diode connected externally.
Supply Voltage (min) | 4V |
---|---|
Supply Voltage (max) | 23V |
Frequency (max) | 360kHz |
Quiescent Current | - |
Voltage Reference Tolerance | ±1% |
Drive Type | Internal PMOS |
European Union Customers
Orders to European countries are delivered by a tracked courier at a rate of €19.50 (5-7 working days).
Deliveries to the EU will be dispatched from the UK via our distribution hub in the Netherlands. You will receive tracking information direct from our courier company when the goods leave the distribution hub.
Using this method means there is no need for you to clear your goods through customs, and VAT will be charged on your invoice in accordance with EU VAT regulations – If you are VAT registered, VAT is 0% using the Reverse Charge rules. If you are not a VAT registered business, VAT is charged at your country’s standard rate.
All prices shown exclude VAT.