The store will not work correctly when cookies are disabled.
-
SAM5504B
SAM5504B Audio Processor with USB Interface
- USB 2.0 High Speed port
- Up to 14 Audio channels IN, 14 Audio channels OUT (digital)
- Dream DSP Array of 4 new 24bit DSP cores
- Supporting 56bit MAC operations (200M MAC/sec)
- New speed optimized 16bit CPU (P16XT) running at 200MHz
- Built-in 1kbit eFuse for configuration and security (program code and sound bank protection)
- Built-in configurable fast Data/Effect RAM up to 32Kx24 (or 48Kx16), + 8Kx24 DSP RAM
- Built-in configurable fast Program Code/Cache RAM, on-the-fly code decryption
- Multi-channel DMA for fast data transfers to external memories
- Low-cost - high performance
0,00 €
-
FXCORE
FXCore Audio Effects DSP
- 16 core registers
- 128 x 32-bit RAM based registers
- 4 digital SIN LFOs, 2 Ramp LFOs
- Built in FLASH for 16 programs
- I2C interface for programming FLASH
- 2 I2S interfaces
- Adjustable sample rate, master or slave selectable
- 6 12-bit POT inputs
- 5 user switch inputs, 1 tap tempo input
- 2 user outputs
- 1 enable/bypass switch input
0,00 €
-
-
-
NJM8202E-TE2
NJM8202E-TE2 Operational Amplifier
- Rail-to-Rail Output: 0.25V~4.75V min. (@V+=5V)
- Enhance the RF immunity from mobile phones
- Operating Temperature: -40°C ~+85°C
- Operation Voltage: +2.5V~+14V(±1.25~±7V)
- Slew Rate: 3.5V/µs(typ.)
- GBW: 10MHz(typ.)
- Low Noise: 10nV/√Hz(typ.) @1kHz
0,00 €
-
SAM5504FX-EK
SAM5504FX-EK Guitar FX Board + Frontpanel
- Audio CODEC: AKM AK4556 (24bit ADC: S/N=103dB, S/N+D=91dB, DAC: S/N=106dB, S/N+D=90dB)
- SPI NOR Flash memory WINBOND W25X20CLSNIG: 2Mbit, for firmware and data storage
- SPI SRAM (APMEMORY APS1604M:16Mbit, optional for top quality reverb and long delay lines)
- USB High Speed, Device mode
- Connection to dedicated Front panel or Host
0,00 €
-
-